Der Artikel ist weiterhin als ^^OTHERCONDITION^^ verfügbar.
Autor: Junlan Wang
ISBN-13: 9783319628332
Einband: Book
Seiten: 107
Gewicht: 530 g
Format: 289x218x15 mm
Sprache: Englisch

Mechanics of Additive and Advanced Manufacturing, Volume 9

Conference Proceedings of the Society for Experimental Mechanics Series
Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics
Geben Sie Ihre Bewertung ab!  
Wir verlosen jeden Monat unter allen freigegebenen Rezensionen
3 Gutscheine im Wert von 20 Euro. Teilnahmebedingungen
Mechanics of Additive and Advanced Manufacturing, Volume 9 of the Proceedings of the 2017 SEM Annual Conference & Exposition on Experimental and Applied Mechanics , the ninth volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies, including:
Design,

Optimization

Experiments

Computations

Materials for Advanced Manufacturing Processes (3D printing, micro- and nano-manufacturing, powder bed fusion, directed energy deposition, etc.)

Mechanics Aspects of Advanced Manufacturing (e.g. mechanical properties, residual stress, deformation, failure, rate-dependent mechanical behavior, etc.)
Chapter 1.Fracture Properties of Additively Manufactured Acrylonitrile-Butadiene-Styrene Materials.- Chapter 2.Complex Modulus Variation by Manipulation of Mechanical Test Method and Print Direction.- Chapter 3.Piezoelectric Inkjet Printing as a Method for the Selective Deposition of Energetic Material.- Chapter 4.A New Heat Transfer Simulation Model for Selective Laser Melting to Estimate the Geometry of Cross Section of Melt Pool.- Chapter 5.Heat Conduction and Geometry Topology Optimization of Support Structure in Laser-based Additive Manufacturing.- Chapter 6.Strain Energy Dissipation Mechanisms in Carbon Nanotube Composites Fabricated by Additive Manufacturing.- Chapter 7.Mechanical Properties of 3-D LENS and PBF Printed Stainless Steel 316L Prototypes.- Chapter 8.Effect of Heat Treatment on Friction Stir Welded Dissimilar Titanium Alloys.- Chapter 9.Effect of Porosity on Thermal Performance of Plastic Injection Molds Based on Experimental and Numerically Derived Material Properties.- Chapter 10.ODS Coating Development Using DED Additive Manufacturing for High Temperature Turbine Components.- Chapter 11.Processing and Characterization of Ti64/AZ31 Multilayered Structure by Roll Bonding.- Chapter 12.Vibration Characteristics of Unit Cell Structures fabricated by Multi-Material Additive Manufacturing.- Chapter 13.Defects, Process Parameters and Signatures for Online Monitoring and Control in Powder-based Additive Manufacturing.- Chapter 14.The Effect of the 3-D Printing Process on the Mechanical Properties of Materials.- Chapter 15.Tool Wear Mechanisms of Phyisical Vapor Deposition (PVD) TiAlN Coated Tools Under Vegetable Oil Based Lubrication.

Zu diesem Artikel ist noch keine Rezension vorhanden.
Helfen sie anderen Besuchern und verfassen Sie selbst eine Rezension.

 

Rezensionen

Autor: Junlan Wang
ISBN-13 :: 9783319628332
ISBN: 331962833X
Erscheinungsjahr: 29.10.2017
Verlag: Springer-Verlag GmbH
Gewicht: 530g
Seiten: 107
Sprache: Englisch
Sonstiges: Buch, 289x218x15 mm, 30 schwarz-weiße und 50 farbige Abbildungen, Bibliographie